MENU

PBM

Marwin

VNE

Koltek - G&H

Resistoflex

A-C Valves

Lee

MCF

Contact Us

VALVE OPERATORS
Handwheel All A-C valves are provided with handwheels as standard. Valves can also be furnished with handwheel extensions and floor stands.	Lever Operator A-C valves quick opening lever operators can be provided in lieu of handwheel on knifegate series, 2" -12" sizes
Electric Motor Operator When remote, auto, or frequent operation is required. Several makes of electric, air, or hydraulic motor drives are available	Bevel Gear Operator Designed to minimize the effort needed in manual operation of larger valves in hard to reach locations. 3:1 ratio for 14" and 4:1 ration for valves 16" and above. Permanent lubrication.
Cylinder Operator Any variety of air or hydraulic cylinder operators can be provided where this type of remote operation is needed.	Chain Wheel Chain wheels are an efficient means of operating overhead and out-of-reach valves. Mount to regular handwheels. Chain guides are provided.

Back to Top

A-C Valves Feature:

1. All-Cast Stainless Steel Construction
2. Full-Flow, Non-Plugging,Bubble-tight positive shutoff in both directions, handling stock solutions to 18% consistency
3. Retained resilient seats preventing failure during operation
4. Full-bodied packing glands with only high-grade packing used
5. Stainless Steel bolts and lock nuts prevent vibration loosening
6. Best abrasive/erosion resistance application available
7. Meet TAPPI standard TIS 405-8 and ANSI 16.5-150 lb. standard

Additional Features

• 2" to 30" all cast stainless, 36" and up fabricated construction
• Available in any stainless steel and many exotic metals
• Available with any type rising stem actuator required
• Complete manufacturing facility to "Custom fit" any application required
• Nationwide stocking distribution system enabling rapid delivery to fill customer's needs.

New Generation Knife Gate Valve

A-C Valves Knife gate valve features a solid one piece cast body in corrosion resistant stainless steel. Compact wafer configuration to TAPPI standard face to face. Designed to handle dense mixtures of stock and slurries. Non-clogging full port design.

This type features a replaceable resilient seat for two-way drip tight shutoff. Available in sizes from 2" to 24" diameter - 150 PSI working pressure. Flanges match ANSI 16.5-150 LB standard with all holes tapped.

Back to Top