 |
MAGTRAPS by CESCO
Remove Unwanted Metal Trash from Food and Beverage
Lines
Serving Food Processors since 1946
|
| CESCO
BUILDS ONLY QUALITY EQUIPMENT TO YOUR SATISFACTION |
WHAT MAGTRAPS DO
MAGTRAPS remove the hazards of unwanted ferrous
and work-hardened stainless contaminants from processing lines. They capture
the finest of particles that pass undetected through electronic metal detectors.
Typically placed in front of pumps, screen and mills,
they protect vital plant equipment from metal damage, with its costly resultant
-Downtime.
When product purity is paramount, install a MAGTRAP in
front of the filter. MAGTRAPS work with virtually all pumped products. Their
rare earth magnets catch all sizes of ferrous debris found in product lines.
They also capture particles of work-hardened 304 and 316 stainless steels
as well as nickel and carbide items that sometime appear in process lines.
TWO MAGTRAP
STYLES:
MAGTRAPS are equipped
with either flat plate magnets of "finger" magnets. Use finger MAGTRAPS (Model
135) for liquids, purees and products with smaller included solids. Use flat
plate MAGTRAPS (Models 115 & 125) with fragile products (fruit preserves,
cooked meat chunks, cottage cheese, etc.), products containing long, sinewy
items, larger chunks and hard-to-move products.
MODEL 115
For low volume applications that require gentle flow
characteristics. It provides minimum tearing and breakage of fragile
solids. An in- ternal baffle diverts the product flow onto a single
flat plate mag- net. Available in 2" and 3" line sizes.
|
 |
MODEL 125
For high volume applications requiring gentle flow characteristics.
An internal baffle diverts the product flow onto two flat plate magnets.
Line sizes to 4". Water jackets are optional. For clarity, the 125-3"
is shown with one magnet off.
|
 |
MODEL 135
Our most popular and effective MAGTRAP. Designed specifically
for liquids and slurries containing smaller chunks. It handles high
flow rates. The product flows past multiple magnetic tubes. Line sizes
to 4". Water jackets are optional. For clarity, the above 135-2" is
shown upside down, with bottom removed
|
 |
USEFUL NOTES
MAGTRAPS can be supplied with all types of line connections.
Models 125 and 135 can have dissimilar inlet and outlet sizes. Magtraps may
be mounted in vertical, horizontal or sloped lines without affecting their
magnetic efficiency. For complete body drainage (no sump area), install Magtraps
I vertical lines. MAGTRAP locations must allow access for cleaning. We would
be pleased to provide you with suggestions and information regarding your
application. Complete instructions accompany every MAGTRAP.
GOOD REASONS FOR USING CESCO MAGTRAPS
| No Electricity |
Built to Sanitary Standards |
| Easy to Install |
Clean-In-Place (CIP) Capable |
| Easy to Clean |
Pressures to 200 psi (13.8 bar) |
| Permanent Magnets |
Good to 300 Degrees F (150 C) |
| No Moving Parts |
Built to Last |
| Captures Items Smaller than Electronic Metal
Detectors Sense |
