An ANSI 150 or ANSI 300 two-piece direct mount flanged high performance ball valve, with an orifice in the ball. These control valves offer distinct advantages.

Advantages:

• The orifice allows for better control of media in the pipeline.
• The seat is encapsulated in a metal ring, which prevents the seat from cold flow.

Standards:

• ASME B16.34 rated

Size:

• Ranges from 1/2” to 12”

Options:

• 15, 30, 45, 60 and 90 degree balls
• ANSI 150
• ANSI 300
• The valves can be NACE certified

Advantages:

• Three piece high performance ball valve
• Body and end caps quality investment casting
• Available in stainless steel or carbon steel
• Blow-out proof stem design
• 100% air tested under water at 80-100 psi
• Working pressure: 2000 WOG
• Temperature range: -20°F to +450°F
• ISO 5211 direct mounting pad
• Locking Device

Size:

• Ranges from 1/4” to 4”

Service:

• Hydraulic
• Steam
• Oxygen
• Vacuum
• Thermal Fluids
• Chemical
• Oil/Gas
• Food Processing
• Dry/Liquid Chlorine

The 9900 series segmented control valve for regulating media flow capacity. This valve is a key product for the ethanol industry.

Advantages:

• The valve has lower torque, which reduces likelihood media, will get trapped
• The valve is excellent in controlling fluid, steam, water, air and other substances

Size:

• Ranges from 1” to 14”

Options:

• The valve body can be wafer style or can include ANSI 150 or ANSI 300 flanges

Control segmented V-port control valves maintain the ball or butterfly valve design which offers no obstruction of the fluids and free passage. The unitary body design gives structural stiffness and minimizes the risk of leakage through the joints itself.

These characteristics are combined with a specially designed guided "plug" segmented control type with inverse "V" wedge opening to optimize a wide and high flow volume capacity. A stable and precise control is achieved by small opening angles.

The segmented V-port shearing action allows a smooth and obstruction-free performance "eliminating pluggings" (clogging reduced).

The body is available with or without flanged connections, wafer style, Series 150 and 300, Carbon and Stainless Steel, in sizes 3/4" up to 12". Reinforced PTFE and metal seats are options.

The segmented V-port control valves can be combined with pneumatic piston or diaphragm and electric actuators. They can be controlled with pneumatic or electro-pneumatic positioners, 3-15 psi, 4-20 mA and digital signals.

There are two actuator mounting options according to the shaft extreme outlet: the standard connection compatible with ISO 5211/1 of square extremes shaft and the splined connection for the installation of diaphragm actuators with DSY-DSZ movement conversors.