IPV Wright Universal Specialty PD Pumps

Wright Pumps conform to
3-A standard 02-09

Circumferential Piston Pumps

Wright Pump's TRA10 and TRA20 series circumferential piston pumps are drop-in replacements for Waukesha® U1 and U2 series pumps, respectively. Wright TRA10 series are the traditional workhorse pumps designed for strip-clean (C-O-P) applications.

The TRA20 series are designed for high hygiene applications, using O-ring sealed rotors and rotor retainers, and offer an optional Clean-In-Place design with internal porting to allow vigorous flushing through all internal chambers. TRA20 series pumps also allow higher pressure capabilities than TRA10 series. The table below provides a cross reference between Waukesha and Wright Pump model numbers, with nominal performance ratings. Photos illustrate some of the many configurations available.

Waukesha Model	Wright Pump Model	Capacity		Pressure
Waukesha Model	Wright Pump Model	GPM	M3/hr	PSI	Bar
006-U1	0060-TRA10	6	1.3	200	14
015-U1	0150-TRA10	9	2.0	200	14
018-U1	0180-TRA10	17	3.8	200	14
030-U1	0300-TRA10	36	8.2	200	14
NOT AVAILABLE	0450-TRA10	58	13.2	400	27
060-U1	0600-TRA10	90	20.4	200	14
130-U1	1300-TRA10	150	34.1	200	14
220-U1	2200-TRA10	310	70.4	200	14
320-U1	3200-TRA10	450	102	200	14
024-U1*	0240-TRA10*	11.6	2.5	200	14
034-U1*	0340-TRA10*	24	5.4	200	14
064-U1*	0640-TRA10*	60	13.6	200	14
134-U1*	1340-TRA10*	100	22.7	200	14
224-U1*	2240-TRA10*	200	45.4	200	14
006-U2	0060-TRA20	8	1.8	300	21
015-U2	0150-TRA20	11	2.5	250	17
018-U2	0180-TRA20	20	4.5	200	14
030-U2	0300-TRA20	36	8.2	250	17
045-U2	0450-TRA20	58	13.2	450	31
060-U2	0600-TRA20	90	20.4	300	21
130-U2	1300-TRA20	150	34.1	200	14
180-U2	1800-TRA20	230	52.2	450	31
210-U2	2100-TRA20	300	68.1	500	34
220-U2	2200-TRA20	310	70.4	300	21

*Rectangular Inlet Flange Models

Waukesha¨ is a Registered Trademark of United Dominion Industries / SPX Corp.